Attentions:
1.400 Mesh filter shall be installed at the inlet of gear pump.
2. Innan du använder, pressa in en liten mängd medium för att smörja växeln från växelpumpens inlopp.
Product Model Selection Instruction：
|
Pump Head
|
Motor
|
|
M
|
0.07
|
S
|
57
|
BL
|
120W
|
|
"M" means by magnetic drive
|
Pump revolution, Unit: ml/rev, note 1 for details
|
Pump body materials, note 2 details
|
Pump head spec, Unit: mm, note 3
|
Motor Type, Note 4
|
Motor Power
|
Notes:
1. Pump output volume: 0.07,0.15,0.3,0.6,0.9,1.5,3.0,6.,12.0 (Unit: ml/rev)
2."S" means pump body material is 316L, gear and shaft sleeve are PEEK, seal with PTFE, the rest others are 316L.
"T" means pump body material is 316L, gear and shaft are Tungsten steel, shaft sleeve is PEEK, seal with PTFE, the rest others are 316L.
"P" means pump body material is PPS, gear materail and shaft sleeve are PEEK, seal with FFKM, the rest others are Hastelloy.
"H" betyder att pumpens kroppsmaterial är hastelloy, växeln och axelhylsan är kik, tätningsmaterialet är ptfe, resten av pumpflödesmaterialet är hastelloy, utseendet och storleken är samma som 316L pump, detaljer produktparametrar hänvisar till 316L pumphuvud.
3. Pump head range: 57, 72, 88. Model 57 has 0.07,0.15,0.3,0.6,0.9,1.5 ml/rev;Model 72 has 1.5,3.0 ml/rev;
Model 88 has 3.0,6.0,12.0 ml/rev.
4.Motor:HS: Stepper Motor; BL: External drive DC brushless; BLA: Inbyggd drivenhet DC borstlös; BLb:Built-in drive DC brushless (potentiometer)DC:Brush motor; Y:Common asynchronous motor; YB:Explosion proof asynchronous motor; SM:Servo motor YP: General asynchronous frequency conversion YBP: Explosion proof asynchronous frequency conversion, SMP: Servo frequency conversion.
Product Model : M1.50S72HS86
Produktdiagram:
Produktparametrar:
|
Pump Model
|
Motor Type
|
L1（mm）
|
L2（mm）
|
Pressure（bar)
|
Weight(kg)
|
Rated Current（A）
|
Imp.&Exp. Size
|
Rated Flow
（L/H）
|
|
M1.50S72
|
HS86
|
242.7
|
48
|
6
|
4.9
|
500r/min
|
G1/4
|
45
|
|
M3.00S72
|
229.8
|
65
|
5
|
G3/8
|
90
|
|
Pump Head Parameter
|
Motor Parameter
|
|
Continuous work pressure
|
1.0MPa
|
Holding torque
|
8Nm
|
|
Fluid Viscosity
|
0.2-3000cps
|
Coil resistance
|
1.5Ω
|
|
Ambient Temperature
|
-40℃-110℃(If the temperature of the conveying medium is over 70 °C, please make a special request.)
|
Basic step angle
|
1.8°
|
|
Static sealing
|
PTFE
|
Rotational inertia
|
3200
|
|
Pump Body material
|
316L
|
|
|
|
Gear Material
|
Gear PEEK, gear shaft 316L
|
|
|
The values in this table are for reference only.
Remarks:
OEM service are avaiable according to your request.
The specifications are only for reference, for details checking, please feel free to contact us.
Pump head structure diagram: 
1. Inner-hexagon screw*3 5. Pump body 9. Rear cover 13. Internal magnetic steel
2. Front cover 6. Tef//lon gasket*2 10. O-ring 14. Isolation cover
3. Shaft sleeve*6 7. Driving gear 11. Platen
4. Pin*2 8. Driven gear 12. Countersunk head screw*4
Product characteristic diagram: 
Product Characteristics:
Ingen puls, hög precision.
the external gear design makes the pump flow relatively unaffected by the system pressure,and the flow output has no pulsation, which can accurately measure the flow, and has strong repeatability.
Stable transmission.
Gear transmission can ensure constant instantaneous transmission ratio.
Zero leakage.
no packing seal or mechanical seal, no wearing parts, using magnetic drive, static seal,truly achieve zero leakage.
Corrosion resistance.
304 / 316L, Hastelloy and engineering plastics can be selected as pump body materials,which can be used in most chemical media.
Efficient and convenient, long service life.
adopt the way of motor direct drive, reduce the vulnerable parts. High efficiency and energy saving, simple maintenance, low installation cost, long service life.
Tillämplighet.
suitable for high differential pressure, high system pressure and wide range of medium viscosity.
long service life.
The magnetic drive design of the non dynamic seal makes the shaft end no longer need the dynamic seal, which ensures the leakage free operation of the pump. The solid and stable shaft support can ensure the accurate meshing of the gear when the pump is running at high speed, ensure the smooth operation of the pump, the high accuracy of metering and the long service life of the pump.
Diversified drive mode.
Magnetisk drivväxelmätningspump kan direkt anslutas till DC borstfri motor, 2-polig och 4-polig växelströmsmotor utan reducerare. The flow control of the pump can be realized by the controller of AC, DC, brushless DC and other motors. We can provide a variety of standard driving methods to meet the needs of customers.
A wide range of applications.
magnetic drive gear pump in the design, manufacture and application of a large number of use of magnetic drive, pump and motor technology. It has the advantages of no pulsation, long life and no leakage. These advantages make our products widely used in chemical, medical, laboratory, water treatment, food and other industries.
Applicable conditions:
All kinds of liquids, high precision fluid transportation, high repeatability, continuous small flow without pulsation.
It is used in aviation equipment, aircraft, spacecraft, chemical laboratory, chemical reagent adding, film manufacturing, pharmaceutical machine equipment, various lasers, micro cooling device of sighting instrument,tobacco flavoring adding, inkjet printing machine manufacturing, inkjet printer manufacturing, high-performance color printing machine and other industries.
|
Industrial machinery and equipment
|
Water treatment
|
Food and cosmetics
|
|
Inkjet printing/painting
|
Mask making
|
Food and Beverage filling
|
|
Oil transportation
|
Booster pressure
|
Filling of perfume cosmetics
|
|
Sand mill/Grinding
|
Circulating cooling
|
Quantitative Transport
|
Contact Now
