2016 hot oil pump Which is better? What are the characteristics of high temperature hot oil pump products?

[Asia pump network hearing] high temperature hot oil pump before use to be manually rotated to ensure that the gear is not stuck, to ensure flexible rotation. In addition, the high temperature hot oil pump if long-term need to clean up in order to avoid media left in the pump affect the next use. So, 2016 hot oil pump Which is better? What are the characteristics of these products? "" "[Procurement] RY125-80-200 type hot oil pump accessories The following Asian pump network Xiaobian recommend you three 2016 popular hot oil pump products, they are using self-cooling structure, changing the traditional water-cooled structure , So that the structure is simple, small size, saving operating costs, good performance, reliable use. The specific products are as follows: Product Name Hot Oil Pump Features WRY hot oil pump WRY series of hot oil pump basic structure for the single-stage single-suction cantilever foot support structure, the pump inlet for the axial suction, the outlet for the center vertical upward, On the base. Adopting double-end ball bearing structure, the front end is lubricated with grease, the back end is lubricated with grease, and the middle is a guide pipe for observing the sealing condition and recovering the HTF at any time. WRY series of heat pump with PTFE material, has a good thermal adaptability to ensure the sealing performance under high temperature. RY high temperature heat transfer oil pump RY high temperature heat transfer oil pump with a combination of packing seal and mechanical seal, packing seal with high temperature filler, with good thermal adaptability, and mechanical seal is the use of high mechanical strength, good wear resistance of the hard Quality alloy materials, to ensure the sealing performance under high temperature conditions. The basic structure of the single-stage single-suction cantilever foot support structure, high-temperature thermal oil pump inlet for the axial suction outlet vertical center up, and the same motor mounted on the base. The basic structure of the LQRY type heat pump is single-stage single-suction cantilever foot support structure. The inlet of the pump is axial suction and the outlet is vertical upward. The motor is mounted on the base. LQRY-type heat-conducting oil pump support the use of double-ended ball bearing support structure, the front end with lubricating oil, the rear end with grease lubrication, the middle of a guide tube to observe the sealing at any time and the recovery of HTF. The above is a small series for everyone to introduce the three hot oil pump products, as to which hot oil pump products, according to the scope of use, carefully view their technical parameters of the range. I hope for your help. Further Reading: Pumps Valves pipe fittings Exhibition 2016 Exhibition of Information Industry, Internet (Xiamen) Technology Co., Ltd. Author: Asian pumps Network Editor: Su group (QQ / micro-channel :) :( starting service hotline:)