Non-blocking submersible sewage pump, automatic mixing submersible sewage pump, cutting submersible sewage pump have in common

May 30, 2022

Non-blocking submersible sewage pump, automatic mixing submersible sewage pump, cutting submersible sewage pump common point and their respective characteristics

Sewage pump series includes AS type tearing submersible sewage pump, GW vertical sewage sewage pump, WQK/QG series cutting submersible sewage pump, PW horizontal sewage pump, LW vertical non-blocking sewage pump, NL series Mud pump, YW type submerged sewage pump, JYWQ series automatic mixing submersible sewage pump, QW (WQ) series non-blocking submersible sewage pump and other sewage pumps.
The non-blocking submersible sewage pump, the automatic mixing submersible sewage pump, and the cutting submersible sewage pump have the following common points:

1. The mechanical seal adopts double-end seal or double-layer type, and it is used in the oil chamber for a long time. The material adopts new hard and corrosion-resistant tungsten carbide material, which can make the pump run safely for more than 8000 hours.
2. The overall structure of the pump is compact, the volume is small, the noise is low, the energy saving effect is remarkable, the maintenance is convenient, there is no need to build a pump house, and it can work by diving into the water, which greatly reduces the construction cost.
3. The electric pump is equipped with overheating or overcurrent protection device to prevent the motor from overloading and heating. The leakage protection device can be set according to user requirements. High-precision, anti-jamming sealed leak monitoring device (configured according to user requirements) for pumps with a power of 7.5kw and above.
4. According to the needs of users, it can be equipped with automatic safety protection control cabinet to monitor the leakage, leakage, overload and over-temperature of the pump to ensure the safety and reliability of the pump operation.
5. The float switch can automatically control the start and stop of the pump according to the required liquid level change, without special care, and is extremely convenient to use.
6, according to the need for the dual-rail automatic coupling installation system, to facilitate the installation of the pump, to meet different use occasions.
7. The installation method has fixed automatic coupling installation and free movement installation, which can meet different use occasions.

First, the characteristics of WQ non-blocking submersible sewage pump:

The WQ series submersible sewage pump adopts a unique single and double-flow impeller structure, which greatly improves the dirt passing ability, and can effectively pass 5 times of fiber material of the pump diameter and solid particles with a diameter of about 50% of the pump diameter.

Second, JYWQ automatic mixing submersible sewage pump features:

JYWQ series automatic mixing submersible sewage pump adopts unique single and double-flow impeller structure, which greatly improves the ability of dirt to pass through, and through the agitating wheel at the lower shaft end or the nozzle at the high pressure of the pump body, the sludge at the bottom of the sedimentation pool is deposited. And the dirt is automatically stirred or sprayed so that the impeller can be sucked in and discharged smoothly, so that the pump has the function of silting.

Third, the characteristics of WQAS cutting submersible sewage pump:

WQAS series cutting submersible sewage pump adopts Italy's advanced cutting technology to chop the scum, plastic products and fibrous materials in the pool so that the impeller can be sucked in and discharged smoothly.

Föregående

Nästa

Kontakt oss

Författare:

Mr. Bruce Tang

E-post:

bruce.tang@macxipump.com

Phone/WhatsApp:

+8613773149257